s7 200/op7

senen

Member
S
Join Date
May 2004
Posts
46
we used to order s7200 with op7 which is already program.now we are trying to install a bare s7200 plc and op7.what i did i upload s7200 program and op7 program which we ordered.

now i try to download this uploaded program to the bare s7200 and op7 and successful.but my problem is my counter don't register to the op7.the counter input is i0.0.is it using hsc????.i try to find
i0.0 but i cannot find it.HELP????/
 

Similar Topics

J
Cable comunication between OP7 and S7-200
Hello Everybody! I need help, I want to make a cable for comunication OP7 with S7-200. If someone know the pins? Thanks advanced J.Manuel...
Replies
2
Views
2,948
renaldotopllari
R
P
OP7 and S7-200 CPU
I have S7-200 ( 226 ) CPU and OP7. While downloading the program in OP7 the transfer mode error occurs. That error I have removed and transfer the...
Replies
2
Views
3,693
Tharon
T
T
op7 and s7-200
hello I have problem with sending recipe from op7 to plc, problem is error Transfer locked. i don't know how to handle with interface area...
Replies
2
Views
1,914
boyo
B
N
*.200 file for OP7
I am looking for the *.200 type file for the Siemens OP7 using ComET200. At least I hope that such a file exists! Best regards, Nico
Replies
9
Views
2,928
ndvl
N
R
S7-200 recovery program from eeprom
Hi. I have a 222 CPU. I need to recover the program from the eeprom memory. Is it possible?
Replies
1
Views
78
BryanG
B
Back
Top Bottom