Cp343-1

lendyck

Member
lendyck
Join Date
Feb 2006
Location
Cambridge, Ontario
Posts
59
Hi,

How can I connect a PG/PC using a regular NIC to an S7 318 processor via a CP343-1?

Some notes:
  • Simatic Manager Step 7 V5.3 SP2
  • Simatic Industrial Ethernet (ISO) is listed in my NIC protocol list
  • No ethernet interface device is listed in the Set PG/PC Interface utility
Thanks.

Len
 

Similar Topics

B
Siemens CP343 Profinet help
Hi, I have a customer with a S7300 from around 2013 which they link to approx 25 inverters, 3 DP to DP converters and 5 IM153 remote I/O units...
Replies
8
Views
320
JERA
JERA
B
CP343-2 not detecting ASi nodes
I've been called to a site to assist with an ASi fault. The line has been down for a couple of weeks following a failure of the ASi power supply...
Replies
6
Views
1,301
beethoven_ii
B
D
S7-300 with CP343-1 Comms Issue
I have an S7-300 and an HMI. The HMI is the only device that talks over Profinet through the CP343-1 module. It's run fine for a couple of years...
Replies
2
Views
504
DJones183
D
A
CPU313C+CP343-1 Communication lag while both OPC and HMI are accessing
Dear experts, I have the following setup: CPU-313C (6ES7313-5BF03-0AB0 V2.6) + CP343-1 (6GK7343-1EX30-0XE0 V2.0) communicating with Siemens PC...
Replies
7
Views
2,690
JesperMP
JesperMP
H
S7 300 communication via cp343-1 lean
I can not see the CPU s7-300 i only see the cp343 as photo the interface is through tcp/ip how can I upload the station via the cp343 module ???
Replies
2
Views
1,004
JesperMP
JesperMP
Back
Top Bottom