5/05 Ethernet Question

Greg Dake

Member
G
Join Date
Jun 2005
Location
Milwaukee, Wi
Posts
550
Greetings,

On the webpage interface for the newer AB 5/05's, is there something that shows Ethernet processor utilization? If so, where? I know in the CLX/CPLX platform it is shown on the web interface.

TIA,

Greg
 

Similar Topics

B
Point IO ethernet adapter version question
Hello, I have a ControlLogix L73 at firmware 24.11, Logix Designer at version 24 I have a 1734-AENT Point IO ethernet adapter, the box says...
Replies
6
Views
1,632
ASF
A
A
fiber ethernet question
Consider two control panels 100 meters apart. Customer is to run fiber between them so the PLC can talk to the HMI. Each panel has an A/B...
2
Replies
29
Views
8,661
agarb
A
S
Slc 505 on ethernet question
Hi guys I hope your all safe and well , I have a question regarding a slc 505 on ethernet is it possible to add a ethernet remote I/O module...
Replies
5
Views
1,869
stu
S
I
Ethernet/IP Question
I am replacing a powerflex 525 on ethernet/ip with a stratix switch. I am upping the drive from a 2 to 3HP. All i should have to change is drive...
Replies
2
Views
1,113
icehube
I
T
Question regarding Ethernet/IP vs Analog I/O
This may be a simple question. I understand the concept and application of analog modules (i.e. Compactlogix) for transducers, and outputs for VFD...
Replies
4
Views
2,044
toddp65
T
Back
Top Bottom