I'm setting up a 10-slot SLC rack. Slot 6 is to be 1746NI16I, 16 channel current i/p and slot 8 is a 1746N08I, 8 channel current o/p. In the datafile window, I'm seeing I:6.0 to I:6.7 allocated ok, but not up to I:6.15. Also, there's allocation in O:6.0 to O:6.7. Likewise, the output module is allocated 8 input words as well as the expected 8 outs. My guess on the missing i/p's is that they're multiplexed, and maybe the O:6 words are control addresses? And maybe the I:8's are module status. Any ideas, please? Thanks.
SLC500 analogue config funnys
- Thread starter DairyBoy
- Start date
Mickey
Lifetime Supporting Member
What SLC do you have?
Are you using Class 1 or Class 3 for the module? (Use Class 3 much easirer set-up)
Are you using Class 1 or Class 3 for the module? (Use Class 3 much easirer set-up)
Ron Beaufort
Lifetime Supporting Member
Similar Topics
I cannot add SLC500 analog input tag (I: 8.3) to EZSeries Touch Panel Editor (V 5.3). I used all the listed tag datatype but it all says "Invalid...
can the slc500 5/05 send a email and text over Ethernet ?
Hello, did anybody know, if there exist an converting cable like the1492-CM1746-M01 (for an 1746-IB16 to an 5069-IB16), for an 1746-HSCE to an...
Customer is buying several spare 504 CPU's to have one handy when there's an issue with the ones in operation. Having them on the shelf for years...
You have to go offline to create the 'Trend' but do you have to download the program to go back Online with the Trend ?