S7-200

Join Date
Oct 2007
Location
Brisbane
Posts
2
Hi All,

i'm new to this, have an application at work requires us to connect a SICK DME-3000 to a S7-200 plc is a 226cpu. DME puts out SSI we have a SSI to GREY CODE converter card. Can anyone tell me how many inputs i will need an if this can actually be done.

Thanks
ASH
 

Similar Topics

Hello, I am in possession of a WAGO PFC 200 750-8216 which I was successfully able to set up as a Modbus RTU Master to a slave device using...
Replies
0
Views
47
Hi, I have a 1214 on ip 192.168.0.100. This is connected to other modules through a switch on same network. I need to connect this to a company...
Replies
1
Views
95
Hi. I’m trying to upload program from existing PLC S7-1200. Create new project in TIA v15.1 then upload. After upload successfully, go online but...
Replies
5
Views
145
Hi all, I am trying to do Modbus communications via the CB1241 RS485 Communication Board on a Siemens S71200 PLC. I am using a 1215C CPU. After...
Replies
6
Views
181
Dear Friends, I have few Profinet slaves connected to S7-1200 over Profinet. I wish get alarms and disagnostics from the devices. (IO-Link...
Replies
3
Views
137
Back
Top Bottom