Coops Member C Join Date Dec 2004 Posts 103 Nov 5, 2007 #1 Hiya, Done a conversion from a Panelview to a Panelview plus but not sure how the comms works. It was on RIO in Panelbuilder32 but now the comms setup is different. Any ideas on how to set it up for direct comms to a PLC 5. Thanks
Hiya, Done a conversion from a Panelview to a Panelview plus but not sure how the comms works. It was on RIO in Panelbuilder32 but now the comms setup is different. Any ideas on how to set it up for direct comms to a PLC 5. Thanks