SCL-programming
- Thread starter Greet
- Start date
L D[AR2P#0.0]
Lifetime Supporting Member
SFC1 returns an integer, code it as follows:
cur_retval:=Read_clk(cdt:=out_time_date);
cur_retval:=Read_clk(cdt:=out_time_date);
Similar Topics
Hello all,
I was trying to do some online programming on a AB control logix PLC v20. I added a new function block routine and added in an SCL...
hello there
my aim is to write a bigger program but i noticed that there was a difference if I calculate c1 first and then c2 ,and if i...
Hello everbody out there.
I have 2 topics actually I wanted to share and get your opinions about but since they are related I sum up in one...
I start to use SCL on MP377 - Siemens Step 7 v5.5 (SCL v 5.3), and I've got some questions:
1) What is "Data Block Referencing UDT" about? What...
Hi
I read somewhere that Siemens are going to lauch SCL onto the 1200... any one know when this is likely?
The limitations of Ladder & FBD are...