I think I may have the answer, I'll have to try tomorrow.
But I'll put this out there.
System:
Compactlogix 1769-L35E
Panelview 550 Std Ethernet connection
Note:
Rsnetworx for Enet sees both items on network.
Mapped file 3 to B3 in compactlogix using rslogix5000
Single pushbutton on panelview screen (just testing) tag B3:0/0
With node name FraxxxTabxxx
Node address of the Compactlogix L35E
No Path
Node type : Compactlogix 1761-net-eni
and this is where I think I made my mistake. I think that the node type should be SLC5/05 or should I set the path and leave the node type
I get an error at the panelview when I push the button:
634 write error
147.xx.xx.xx ; tag b3:0/0
What do you guy's think
Thanks in Advance
But I'll put this out there.
System:
Compactlogix 1769-L35E
Panelview 550 Std Ethernet connection
Note:
Rsnetworx for Enet sees both items on network.
Mapped file 3 to B3 in compactlogix using rslogix5000
Single pushbutton on panelview screen (just testing) tag B3:0/0
With node name FraxxxTabxxx
Node address of the Compactlogix L35E
No Path
Node type : Compactlogix 1761-net-eni
and this is where I think I made my mistake. I think that the node type should be SLC5/05 or should I set the path and leave the node type
I get an error at the panelview when I push the button:
634 write error
147.xx.xx.xx ; tag b3:0/0
What do you guy's think
Thanks in Advance