Compuweight PSC500 data extract.
I would like to take information from a compuweight PSC500 scale controller for use with a transfer system controlled by a PLC5/40.
The goal of the project is to record product transfers into a database. If I can get the information into the PLC or into the PC running RSVIEW I would be able to take it from there.
There is an RS232 out for a printer on the scale controller but I have never done any RS232 interface (well from a design level like this is).
I would like to take information from a compuweight PSC500 scale controller for use with a transfer system controlled by a PLC5/40.
The goal of the project is to record product transfers into a database. If I can get the information into the PLC or into the PC running RSVIEW I would be able to take it from there.
There is an RS232 out for a printer on the scale controller but I have never done any RS232 interface (well from a design level like this is).
