S7-200 highspeed counter
- Thread starter Eduard
- Start date
hjajoe
Member
Hi-speed counter
Hi Eduard!
It is easy to program, use the wizards.
Go to wizards and choose high speed counter, then you can use HC0 to HC5.
next: choose mode, from 0 to 12, see system manual page 120,
you can also see which inputs to use for clock,direction
reset and start.
Then go ahead, the wizard and manual explains it all.
Bye
hjajoe
Hi Eduard!
It is easy to program, use the wizards.
Go to wizards and choose high speed counter, then you can use HC0 to HC5.
next: choose mode, from 0 to 12, see system manual page 120,
you can also see which inputs to use for clock,direction
reset and start.
Then go ahead, the wizard and manual explains it all.
Bye
hjajoe
Similar Topics
Hello all,
Who can help me to understand what is wrong I have a timings problem in the writen code I think.
Alvast bedankt,
Hello, I have a question about an encoder that has absolute measurement. Specifically, it's the Lika SMA5, which I would like to connect...
Hello, I have a question about an encoder that has absolute measurement. Specifically, it's the Lika SMA5, which I would like to connect...
Hi.
I have a 222 CPU. I need to recover the program from the eeprom memory. Is it possible?
Hi all,
Currently having trouble getting a speed reference to write over modbus to an Omron M1...
I can successfully write a run command and...