bmw_apprentice
Member
Hi guys
I am trying to use a multihop function in a msg block of rockwell. im having some problems making it work despite having done this before.
i am trying to send from a PLC 5 over ethernet then to a SLC5/04 over DH+.
The setup i currently have is:
using:
from,
Platform:Control Net
Processor
LC5/80C 1.5
Series: F-Hotbackup
to,
1747-L541 5/04
MSG Setup Screen
This PLC-5
Communication command: PLC5 Typed Write to SLC
Data Table Address: N209:90
Size in Elements: 1
Port Number: 3A
Target Device
Data Table Address: N207:90
Multihop:Yes
under the Multihop Tab
From Device
This PLC 5
CLX Backplane
1756-DHRIO
From Port
3A
N/A
Channel B
To Address Type
1756-ENet I.P
Backplane Slot (dec)
Station
To Address
172.25.224.XX
4
17d
in the routing table we have attatched link IDs to every single device we may need to talk between as per the rockwell manual.
we are pulling our hairs out...save us! a beer for the guy who helps
Any other information you could need just ask.
I am trying to use a multihop function in a msg block of rockwell. im having some problems making it work despite having done this before.
i am trying to send from a PLC 5 over ethernet then to a SLC5/04 over DH+.
The setup i currently have is:
using:
from,
Platform:Control Net
Processor
LC5/80C 1.5 Series: F-Hotbackup
to,
1747-L541 5/04
MSG Setup Screen
This PLC-5
Communication command: PLC5 Typed Write to SLC
Data Table Address: N209:90
Size in Elements: 1
Port Number: 3A
Target Device
Data Table Address: N207:90
Multihop:Yes
under the Multihop Tab
From Device
This PLC 5
CLX Backplane
1756-DHRIO
From Port
3A
N/A
Channel B
To Address Type
1756-ENet I.P
Backplane Slot (dec)
Station
To Address
172.25.224.XX
4
17d
in the routing table we have attatched link IDs to every single device we may need to talk between as per the rockwell manual.
we are pulling our hairs out...save us! a beer for the guy who helps
Any other information you could need just ask.
Last edited:
