I am a new employee of a Systems Integrator company. One of our projects requires us to replace Allen-Bradley SLC 500 modules with ControlLogix modules. I was able to find equivalents of all the required modules from SLC 500 to ControlLogix modules except one. Do you guys know the equivalent module of SLC-Based Stepper Controller Module (1746-HSTP1) in a ControlLogix module? Thanks!
SLC-Based Stepper Module (1746-HSTP1) to a ControlLogix module?
- Thread starter bcube79
- Start date
Hello bcube79;
Do you know of these modules?
http://www.amci.com/plc-modules/plcmodules-controllogix-stepper-motor-controller.asp
Hope this helps,
Daniel Chartier
Do you know of these modules?
http://www.amci.com/plc-modules/plcmodules-controllogix-stepper-motor-controller.asp
Hope this helps,
Daniel Chartier
Similar Topics
Does anyone know of a good HMI program that can run on Windows 7 or Windows 10 and communicate to 2 SLC 5/05 PLCs?
I want to have a Info screen...
I’m attempting to send a temperature from a SLC-5/02 to an EZiMarquee display. The vendor said to use a MSG instruction to send the data to the...
Hello all. I have a few SLCs in my plant and of late we've seen a weird issue: The system will be running normally and then randomly the outputs...
I am working on setting up a Prosoft Datalogger model PLX51-DLplus-232. This unit will be collecting data from a SLC 5/05 on the DB9 port set to...
I have a redundant ControlLogix being set up. This program reads a value from a remote site which happens to be SLC PLC. Rockwell mentions SLC...