pullareddy Member P Join Date Nov 2007 Location kkd Posts 13 Nov 22, 2007 #1 Variable table value is not matching with Function block value in S7 Deference in decimal points in LAD
Variable table value is not matching with Function block value in S7 Deference in decimal points in LAD
aikona Member Join Date Oct 2003 Location B2220 plaas dorpie Posts 182 Nov 22, 2007 #2 Need more info ! Could be that the FC is using a word or byte or even double word ... are you using the same format in the vat table Eric
Need more info ! Could be that the FC is using a word or byte or even double word ... are you using the same format in the vat table Eric
pullareddy Member OP P Join Date Nov 2007 Location kkd Posts 13 Nov 22, 2007 #3 we are using a real value in DB block and same in vat table
Madman Member Join Date Nov 2007 Location Madhouse Posts 36 Nov 22, 2007 #4 Maybe you used different representation of you variable table value and FB value?
PeterW Member P Join Date Jun 2006 Location Calgary, AB Posts 2,531 Nov 22, 2007 #5 Also, is you block called more than once and you've not set up to monitor a single instance?
dahnuguy Member D Join Date Mar 2007 Location SC Posts 720 Sep 23, 2009 #6 did someone mention block consistancy? select "blocks" in project tree, then "edit" from the menu, go down to block consistancy. Save all check BC download all to PLC. That is if nothing is actually wrong in your code.
did someone mention block consistancy? select "blocks" in project tree, then "edit" from the menu, go down to block consistancy. Save all check BC download all to PLC. That is if nothing is actually wrong in your code.