edwardel22
Member
Got A German Bender In Which I Need To Change Some Inputs Somehow? Any Sugestions Or Any One Know Anything About Them?
Rosenberger Benders
- Thread starter edwardel22
- Start date
rsdoran
Lifetime Supporting Member
Multiple posts on the same subject will not get better results.
Stick with the original thread AND explain exactly what you have.
Stick with the original thread AND explain exactly what you have.
Edward,
Is it the bender you want to change, or the PC I/O board program? How is this thing really set up? Does the machine contain the digital program, or is that inside a computer that is cabled to the bender?
The more details you share, the better response you will get.
Is it the bender you want to change, or the PC I/O board program? How is this thing really set up? Does the machine contain the digital program, or is that inside a computer that is cabled to the bender?
The more details you share, the better response you will get.
edwardel22
Member
OP
It contains a motion program that is triggered by a momentary input that is connected to the PC I/O Board inside a smaller pc conected to a contorller like hmi in which the opearator uses to operate the programs. The program and all prints are german so it makes it almost impossible to change.