how would i draw a ladder diagram
2 pumps: 1st output is to stay on for 10 seconds and controlled by a start stop switch.
2nd outputis to come on after 1st comes true and run for 20 seconds.
each output is to have a visual output to indicate status of input
(with 2 resets)
2 pumps: 1st output is to stay on for 10 seconds and controlled by a start stop switch.
2nd outputis to come on after 1st comes true and run for 20 seconds.
each output is to have a visual output to indicate status of input
(with 2 resets)