View Full Version : Need help with LogixPro !!

December 9th, 2007, 11:52 AM

I have been using LogixPro program and i am really bad with it..:bawling:

I am working on Bottle Line and got lots of problems.. i ran all the motors perfectly i was using counter for broken bottles and it worked fine and also i have done the thing where the big bottle go to different box than the small ones. But when it comes to fill these bottles it didnt work..

I am looking for somone who done it before and would be great if he could post the full ladder digram..

thx in advance

( Excuse my english :nerves: )

December 9th, 2007, 12:05 PM
You will get alot more help if you post what you have done. Others will
help you find the problems.
I have not used LogixPro so no help from me there. Having said that,
click on download at the top of this page then click on Allen Bradley,
then scroll down until you see what you want.
Lancie1 will be around shortly.

December 9th, 2007, 12:14 PM
Thx alot Mickey i think i found what i was looking for !