Humidity sensor to PLC
- Thread starter karlag
- Start date
Mickey
Lifetime Supporting Member
If this http://www.vaisala.com/instruments/...ides/humidity/hmd60 user guide in english.pdf
is what you have the document says it has a 4-20 ma output. Most PLC's will accept a 4-20 ma signal. No need for an amplifier
is what you have the document says it has a 4-20 ma output. Most PLC's will accept a 4-20 ma signal. No need for an amplifier
Similar Topics
Hello,
I am writing my thesis for a company and I have to connect a GEFRAN H5000 humidity sensor to a B&R PLC. The information of the sensor...
we are going to be integrating a new set of controls using the direct logic 205 platform. Please, i need some help in selecting a good, reliable...
I am looking for temperature/humidity sensor recommendations.
Would like the sensor to display temp and humidity.
Need to connect to a Contrologix...
For you instrument people. I'm using a PLC, VFD, and HMI for climate monitoring and control. Automation direct has combo Humidity and Temp sensor...
so I have this (temp +relative humidity) sensor ( pfmini72) from mitchell instruments , the sensor works fine for temperature reading but when it...
