plcengineer
Member
I have a panelview standard 1200 that is talking remote I/O to a plc5. I know that I have 4 btr's and 4btw's setup in the plc for communicating. I am wandering how I can tell where the panelview address goes. For example, This is a tag address in the Panelview..BI2/0/0 -1/7 BCD. How can I trace this address back through the plc.. I have BTR/BTW's setup for rack 0, module 0, group 0 and rack 0, module 1, group 0.. Also , I have rack 3, module 0, group 0 and rack 3, module 1, group 0..
How do I know what BTR/BTW would be linked to BI2/0/0-1/7?
Thanks,
How do I know what BTR/BTW would be linked to BI2/0/0-1/7?
Thanks,