hc1 and ATCH

juan

Member
J
Join Date
Apr 2003
Posts
50
I have two questions:

The value Hc1 does it contain the value of the counter at each time?

If I attach an interrupt to event 13 will interrupt occurs EACH time CV=PV or just once???

Thanks Juan
 

Similar Topics

H
Webvisu not showing Codesys V3.5 SP13 Patch 2
Hello, I am using a Hitachi Micro EHV+ for a small project, and I wanted to have a Web visu, done with Codesys V3.5 SP13 Patch 2. I test the...
Replies
6
Views
286
Zensequitur
Zensequitur
T
600 Volt High Flex Ethernet Patch Cables
Can anyone recommend a flexible 600-volt shielded ethernet patch cable? I have used them from Allen Bradley / Panduit before and they are too...
Replies
0
Views
100
Tim Ganz
T
T
trend showing a hatch pattern
Hello. I am working in FTVSE v8. I have many trends set up some of them work others do not. The ones that don't work show the foot print of the...
Replies
3
Views
239
Tyrant44511
T
N
Honeywell HMIWeb Display Builder - error script type mismatch
Hello, I am learning to create shapes and VB Scripts in HMIWeb Display Builder. I wanted to change color of my rounded rectangle by script. I...
Replies
0
Views
104
Nat09817
N
J
Beckhoff hardware mismatch
hello, I am using Beckhoff with TwinCAT3 and when I change or add some new hardware or for any reason, there is a mismatch in the real hardware vs...
Replies
1
Views
125
AlfredoQuintero
A
Back
Top Bottom