Agostinho Macedo
Member
- Join Date
- Jun 2002
- Posts
- 24
I wanyt to but a modbus driver (RS232 and TCP/IP) to work with MSAccess. If you know who sell´s tell me.
modbus driver
- Thread starter Agostinho Macedo
- Start date
seppoalanen
Member
ModBus->(OPC->) VB 0r C application with ODBC or OLE-DB/ADO -> MSAccess database.. I think something like that you will need.
Try ModBus drivers by google-search.
Try ModBus drivers by google-search.
There are also two suppliers of activeX drivers, you will find them at these two sites:
www.automatedsolutions.com
www.plcdriver.com/activex.htm
I do believe that they work directly with standard office programs via activeX (I have never tried it though).
www.automatedsolutions.com
www.plcdriver.com/activex.htm
I do believe that they work directly with standard office programs via activeX (I have never tried it though).
Similar Topics
Does anyone know where I would be able to find the modbus driver for Kingfisher Series 2? (CP-11 CPU).
Toolbox32 is asking for a *.d32 file...
PLC: AutomationDirect DL06
Modbus driver: Wonderware InTouch DASMBTCP
Goal: read the C100 discrete value from the DL06.
I have successfully...
Scadapak Com Port 3 Rs232
Pin 5 RXD Pin 6 TXD Pin 4 GND
On the computer Com Port 1 9 pin
IGS Driver can I just use pin 2 , 3 and 5
trying to create some tags with the modbus drivers
in iFix. Normal I would do
Channel1.Device1.(tag address)
I figured for modbus that would be...
I am trying to connect a GOT1000 HMI to a Wago 750-881 PLC using the TCP MODBUS driver but can't read the registers
I'm using 20 registers from...