Hello
Does anyone have any experence connecting a mitsubishi Q00 and an FX3U via ethernet.
What GX-D settings Do I use for each PLC
And which cammands are required.
I already have a touch screen, MX coponenets, and a bar coder running into the Q00 via ethernet
And can program Both PLCs via ethernet ports (both connected to same hub)
But can get to two to talk.
Does anyone have any experence connecting a mitsubishi Q00 and an FX3U via ethernet.
What GX-D settings Do I use for each PLC
And which cammands are required.
I already have a touch screen, MX coponenets, and a bar coder running into the Q00 via ethernet
And can program Both PLCs via ethernet ports (both connected to same hub)
But can get to two to talk.