marcos59
Member
need pin-out to make a programming cable for a PLC5/25 with RS232 to Serial port PC! can someone help?
PLC 5/25 program cable
- Thread starter marcos59
- Start date
Mickey
Lifetime Supporting Member
The PLC5/25 does not have a serial port. The 9 pin port is a DH+ port.
You will need a 1784-PCMK card or KF2 box.
See Pic and PDF for info
You will need a 1784-PCMK card or KF2 box.
See Pic and PDF for info
Similar Topics
We have a third-party rs232 cable, can we connect it to the Rockwell PLC-5/30 and upload the program ? The controller is an Allen Bradley 1785-L30B .
Hi Guys,
I'm looking for Link(s) to PLC Program download Ethernet Cable.
I want to purchase, I will appreciate if you could please send me link(s)...
Good evening, during the download program on a IC200CPUE05 VERSAMAX, after returning the necessary information in the set tempory IP address,the...
Dear Sirs,
Does anyone knows the pinout for the CLIC-02 WEG PLC program cable?
Thanks in advance!
Regards,
Reinaldo Flamino.
i have plc (omron cj1m cpu13 )
i need type of cabl to connect plc to pc to transfer program from plc to pc