miodragkulas
Member
Have a problem in RS232 communication between Mitsubishi FX2n and Protool/Pro project running on PC. Used Protool driver Mitsubishi Fx and Protocol 4 but there is no communication. Connection done by SC-09 cable-converter.
Mitsubishi FX2n with Protool/Pro on PC
- Thread starter miodragkulas
- Start date
Similar Topics
I have a FX2N MITSUBISHI PLC
Can I communicate with Protool using MITSUBISHI Protocol 4 V6.O (This is an option
in ProTool configuration)
I...
I have a project using a MITSUBISHI FX2N PLC and PROTOOL as HMI from SIEMENS
ProTool gives me the option to read (or change) a bit of a D memory...
I've worked on one Mitsubishi PLC in the past 40 years. Now, it looks like I get to tackle another one...using GX-WORKS3-C1 software which I...
I have been asked to work on a Mitsubishi Melsec FX2N-80MR PLC but have no experience with Mitsubishi at all. The hope is to get online to find...
Hi all
IÂ’ve never worked with Mitsubishi PLCÂ’s or software, but a customer at our branch has requested the PLC program for future...