ahmed yousri
Member
please , i want to know the methods of communication between plc omron and visual basic , and if there is any documents which explain the codes , please upload it
communication between plc omron and vb
- Thread starter ahmed yousri
- Start date
tragically1969
Member
ahmed yousri said:
May i suggest you start with google for such a request, i did and this came up as the first page:
http://www.control.com/1026146071/index_html
IO_Rack
Member
There are a few examples here.
The easiest way is to use Omron's Host Link protocol. Here is an example. Host Link Demo Program.
The nuts and bolts of this protocol are found in this manual.
W143-E1-5 C Series Rack Mount Host Link Manual
The easiest way is to use Omron's Host Link protocol. Here is an example. Host Link Demo Program.
The nuts and bolts of this protocol are found in this manual.
W143-E1-5 C Series Rack Mount Host Link Manual
Last edited:
ahmed yousri
Member
OP
thanks for your quick answer
Similar Topics
i have two plc
1. s7-1212dc/dc/dc ip; 192.168.0.1
2. s7-1500 1513-1pn ip; 192.168.3.2
i need to get data from plc1 to plc2. any idea how to do...
I'm trying to write a data in Arduino using MODWR function block .I used the code I got from online for both PLC and Arduino. I made the wiring...
Communication between devices will stop working for a certain period of time. I caught the error message using WireShark. I cannot identify the...
I am trying to establish communication between Siemens PLC 1500 and Matlab.
I followed a tutorial on youtube at this link:
But when I got to the...
Hi all, I don't have experience PLC programming so it might be a stupid question.
I made a socket request to PLC and there is no problem to read...