1756-HSC Wiring

Greg Dake

Member
G
Join Date
Jun 2005
Location
Milwaukee, Wi
Posts
550
Greetings,

I have attached a screenshot of something that isn't clear to me. Do Pins 35 and 36 get power from a separate supply? It doesn't say anywhere in the book..There isn't 24V across either of these two pins and common. I need power for my encoder, I'm assuming I supply power to pins 35 and 36, but will wait for a response just in case...

TIA,

Greg


22hhg.PNG
 
IIRC pins 35 & 36 are the power connections for the outputs.
They are not needed for an encoder input.
 

Similar Topics

T
Use a Control Logix 1756-IB16I module as opposed to a 1756-HSC counter frequency
I have am trying to determine if I can use a 1756-IB16I (or some dc input equivalent) to handle a 24vdc input pulse frequency of 80 pulses per...
2
Replies
15
Views
911
Contr_Conn
Contr_Conn
P
Micromotion pulse input to 1756-HSC
Just finished an upgrade from a SLC500 to CLX where they had a 1746-HSCE and we're now using a 1756-HSC. Two wire pulse signal from the...
Replies
2
Views
1,296
phuz
P
C
Resolver wired to a 1756-HSC
I have an older SLC500 that has a PLS card in its rack. I want to remove the SLC and add a L23E-QBFC1. Can a resolver be wired up to the High...
Replies
2
Views
1,687
Captain7
C
W
1756-hsc
Our ABB Vision System requires a Pulse Train Input from an Encoder (12-15 VDC)to calculate the speed of the web. Instead of adding an encoder to...
Replies
2
Views
1,552
lanman
L
B
1746-HSCE vs 1756-HSC/B
I am upgrading HSC modules and have some questions. I can't attach the manuals for reference as they are too large. 1746-HSCE uses M0:e.1/4 for a...
Replies
0
Views
1,648
bdb1324
B
Back
Top Bottom