Communication uniop & CPU 222CN or 214

Chandu

Member
C
Join Date
Feb 2007
Location
Mumbai
Posts
2
Dear Friends

can anybody help me for communication between Uniop HMI eTop 05 and Chinese CPU 222 ?
Another issue with Uniop HMI eTop 05 and CPU 214 (German)

Please support me to resolve this issue i am stucked on site.

Thanks in advance.
 

Similar Topics

S
Communication not done between Woodward controller and PhoenixIO
I have Woodward Controller EASYGEN-3500XT and Phoenixcontact make IO CAN-CUPLER part no: 2702230, Analog Input card: 2861412, Analog Output Card ...
Replies
0
Views
27
Sandeep Patel
S
P
Communication Between Compact Logix and Guard Logix Error
Hello Everyone, I have a issue with communication between two different PLCs. So here is the facts, The Master PLC is Guard Logix 5069 with IP...
Replies
4
Views
87
Ken Roach
Ken Roach
A
communication between two siemens plc's with different ip address
i have two plc 1. s7-1212dc/dc/dc ip; 192.168.0.1 2. s7-1500 1513-1pn ip; 192.168.3.2 i need to get data from plc1 to plc2. any idea how to do...
Replies
5
Views
112
mk42
M
A
WinCC Unified and PLC weird communication issue
I have created a project in TIA Portal v16 Upd6 with S7-1200 (6ES7214-1AG40-0XB0) and WinCC Unified (PC station). The communication between the...
Replies
4
Views
145
mk42
M
H
No communication with PLC 90-70
Hello We have installed several G.E. Fanuc 90 70 PLC Everything was ok but suddenly we can not communicate anymore with any PLC with the software...
Replies
0
Views
70
Hazatov
H
Back
Top Bottom