Hi everyone,
i work in a paper converting faciltiy and we have a machine with modicon 984-380 plc,this machine was shutdown for serveral years and now we want to run this machine,we powered up th e machine and found out plc run led is not lit,while power ok and ready lights are lit green.and none of its output lights are on.this plc has AS-E380-902 Standard 380 Exec Cartridge AND AS-M380-004
4K MEMORY CARTRIDGE,i'm not sure i still have program in it, so what is the best way to find out if there is program in it or how i can put this cpu back to run mode, i don't have any programming software or cable for this plc either. I also found a gould P964
hand held programmer i'm not sure this guy is compatible with plc or will be of any help for me in this case.please advice thanks in advance
i work in a paper converting faciltiy and we have a machine with modicon 984-380 plc,this machine was shutdown for serveral years and now we want to run this machine,we powered up th e machine and found out plc run led is not lit,while power ok and ready lights are lit green.and none of its output lights are on.this plc has AS-E380-902 Standard 380 Exec Cartridge AND AS-M380-004
4K MEMORY CARTRIDGE,i'm not sure i still have program in it, so what is the best way to find out if there is program in it or how i can put this cpu back to run mode, i don't have any programming software or cable for this plc either. I also found a gould P964
hand held programmer i'm not sure this guy is compatible with plc or will be of any help for me in this case.please advice thanks in advance