Siemontien
Member
Hello All:
We have an operating TIWAY 1 Local Area Network within TI535PLCs, the hardware of UNILINK HOST ADAPTER 500-7111 has failed to working, the ADAPTER GOOD LED (LED number 1) and/or other LEDs not illuminate. I have followed the manuals to do the checking and troubleshooting, then I have found the power supply card of the UNILINK HOST ADAPTER is failure, that's no any voltage outputs.
I know the SIEMENS UNILINK HOST ADAPTER 500-7111 is matured already, it's hard to get new one to replace and to solve the problem. So I need anyone's help!
Please tell me what is the output voltage for the pins of the power supply card output plug P2. (the opened case picture file:
)
The information of our UNILINK ADAPTER:
MODEL: 500-7111
SOFTWARE No.:2493453-0002 REL 1.1
85 ~ 132 VAC MAX., 47 ~ 63 Hz
Any Help will be appreciated.
Thanks in Advanceing.
We have an operating TIWAY 1 Local Area Network within TI535PLCs, the hardware of UNILINK HOST ADAPTER 500-7111 has failed to working, the ADAPTER GOOD LED (LED number 1) and/or other LEDs not illuminate. I have followed the manuals to do the checking and troubleshooting, then I have found the power supply card of the UNILINK HOST ADAPTER is failure, that's no any voltage outputs.
I know the SIEMENS UNILINK HOST ADAPTER 500-7111 is matured already, it's hard to get new one to replace and to solve the problem. So I need anyone's help!
Please tell me what is the output voltage for the pins of the power supply card output plug P2. (the opened case picture file:
The information of our UNILINK ADAPTER:
MODEL: 500-7111
SOFTWARE No.:2493453-0002 REL 1.1
85 ~ 132 VAC MAX., 47 ~ 63 Hz
Any Help will be appreciated.
Thanks in Advanceing.