Siemens PG 2000 Software

Hello Daniel.
Thanks, I followed the link and found whta I needed. Thank you VERY much, I appreciate it. I loaded it and it works, so all is well.

Tristan Brammer
 
hello guys,
I'm not able to communicate with the S-5 Plc using PG-2000. Help me configuring the program, also I'm using USB Kabel for the communication.

thank you
Mubeen Bawazeer
 

Similar Topics

OK. You guys helped me out a bunch with my first Siemens question. I found a bunch of issues with integrity checking the PLC programs I was...
Replies
3
Views
112
Hi, I have a 1214 on ip 192.168.0.100. This is connected to other modules through a switch on same network. I need to connect this to a company...
Replies
1
Views
95
Hello. I appreciate the insights here and the willingness to share. I've got a lot of Rockwell experience, but my Siemens experience is...
Replies
6
Views
133
Kindly, has anyone tried to control Lenze servomotors with Siemens S120 drives ? Any special hints ? Have some concerns for the resolver and servo...
Replies
5
Views
180
Hi everyone, I want to upload the program from my CPU317TF-2 DP to my PC via connecting to CP 343-1 Advanced since it has LAN ports and the CPU...
Replies
1
Views
121
Back
Top Bottom