cables

yazan83

Member
Y
Join Date
Oct 2007
Location
Damascus
Posts
20
i want to connect some sensors which have analog output (current 20 ma ) to remot I/o unit .if the distanse between each sensor and the unit is 10-20 meters. please what is the best type of cable can i use ?
 

Similar Topics

U
Using 2 cables on a Profibus connector
Hi, I was noticing that Profibus connectors have 2 ports on them that can house 2 separate cables. Can I use 2 cables with Profibus signals...
Replies
4
Views
174
Ken Moore
Ken Moore
T
600 Volt High Flex Ethernet Patch Cables
Can anyone recommend a flexible 600-volt shielded ethernet patch cable? I have used them from Allen Bradley / Panduit before and they are too...
Replies
0
Views
102
Tim Ganz
T
J
Proface Terminal software & cables
Hi all, i have several Proface GT2400 terminals and i need to get the software and interface cables and i have several questions. I am assuming...
Replies
3
Views
157
mikeexplorer
M
A
Cables to use with Prosoft MVI56E-MCM RS-485 2/3 wire
Hi all, I wonder what's the best type of cable to use for RS-485 2 wire + GND That is, Data+, Data- & GND I know that Belden 9841 (not...
Replies
10
Views
1,067
AREDA
A
K
three cables for three phases or three wires from three cables
Kindly, we connected electrical power, 3x380 vac, between a supply station and an electric cabinet, away 180 meters. The calculation software...
Replies
11
Views
832
I_Automation
I_Automation
Back
Top Bottom