In RSLogix 5 and 500, you can set the cross reference disply on rungs. Is there any way to do the same thing in 5000? And if not, why is nobody else complaining about this? I have searched throuygh the archives here and in the inter-webs to no avail.
I use this function intensively in complicated 500 and 5 programs. Being able to track down errant behaviour when on-line is invaluable. I fear that not being able to do so in 5000 will reduce my effectiveness.
I use this function intensively in complicated 500 and 5 programs. Being able to track down errant behaviour when on-line is invaluable. I fear that not being able to do so in 5000 will reduce my effectiveness.
Last edited: