Panelview 330 Alarm

Luke2

Member
L
Join Date
Nov 2007
Location
Alberta
Posts
12
In Panelview 330, I have an Alarm banner that I have made triggers for it. Is there any way to program a external light to go on everytime there is a alarm banner present and will turn off when the CLEAR button is pushed. Thanks
 

Similar Topics

M
no active node on network for panelview 330
I am using a PanelView 300 Micro and am getting the error "no active node found on network". How do I correct this problem and use the panelview...
Replies
2
Views
4,865
LJBMatt
L
J
Connecting a Micrologix 1500 to a PanelView Plus 7
I have been working on this for a while now and I can't seem to get it. I was finally able to view the 1500 on the PanelView under the serial...
Replies
1
Views
79
jscampbell210
J
C
Adding PanelView Plus 7 to the network
Hi Everyone, Currently we have three plants running with Controllogix PLCs (L72, L73, L74). In each of these plants we have 2 FTView SE...
Replies
0
Views
53
celso3093
C
T
can i change panelview text using keypad?
Hey all, i have a panelview screen (image attached), with 4 items on it. Program 1, Program 2, ...3, ...4. The PLC i am using is a compactlogix...
Replies
5
Views
168
Ken Roach
Ken Roach
F
PanelView Plus and .CRV Files
Hello All! Ok, we got a Work cell from a Integrator that is sending saved scanning data from the PLC to HMI (Panel View Plus) when I look at this...
Replies
3
Views
79
Foxtrot2050
F
Back
Top Bottom