PERSPOLIS Member P Join Date Jun 2002 Location ontario Posts 295 May 6, 2008 #1 how can I find out the scan time of the processor (5/03) thanks
widelto Member Join Date Jul 2005 Location Barranquilla, Colombia Posts 3,392 May 6, 2008 #2 On rslogix500 go to left pane, there go to processor status and look for scan times, you will find S:22, S:23, S:3H, S:3L and S:35. Last edited: May 6, 2008
On rslogix500 go to left pane, there go to processor status and look for scan times, you will find S:22, S:23, S:3H, S:3L and S:35.
PERSPOLIS Member OP P Join Date Jun 2002 Location ontario Posts 295 May 6, 2008 #3 Thanks I wonder if there is a way that scan time can be increased manually prior to run mode or tough luck, being impossible.
Thanks I wonder if there is a way that scan time can be increased manually prior to run mode or tough luck, being impossible.
OZEE Member O Join Date Mar 2006 Location Kansas Posts 1,695 May 7, 2008 #4 It reports the scan time -- i.e., how long it takes the processor to scan the program. You cannot force a fixed value to the scan time. It's going to take as long as it needs to scan the program. Why are you wanting to change it??
It reports the scan time -- i.e., how long it takes the processor to scan the program. You cannot force a fixed value to the scan time. It's going to take as long as it needs to scan the program. Why are you wanting to change it??
TimWilborne Lifetime Supporting Member Join Date Oct 2005 Location Roanoke, VA Posts 2,210 May 7, 2008 #5 If your trying to run a program in specific intervals you may try a timed interrupt