jacokapp
Member
Anyboby have an idea how to do the setup of interbus slaves(digital input and output cards) on a KUKA KRC1 ?
Interbus slave setup on KUKA KRC1
- Thread starter jacokapp
- Start date
MartB
Lifetime Supporting Member
I've never set up interbus on a KRC but have you checked that you have the correct IO.sys file configured? Make sure you're pointing to the correct device driver or else you have no chance of seeing any network connected to the KRC.
Similar Topics
Good Morning,
Can anybody tell me how to Integarate profibus as master and interbus IO's as s
slave.Actually i am having Bosch CL350 Plc and...
I am stuck on fail ctrl
error 1013 cannot get IP nor can do firmware update need help pls urgent
Hi All,
I am currently working on a Simatic S5 upgrade to the S7-400. The currently installed configuration PLC is connected to 3 LENZE 9300...
I have a customer who needs to upgrade a currently working INTERBUS system. Their currently working remote panels using PHOENIX CONTACT are in...
Dear all,
I’m going to use IBS S7 300 DSC-T to communicate with my S7-300 to Interbus I/O modules, but I don’t know how to make the necessary...