RSNetWorx MD Results - "Status Not Read : [Error]"

Syrist

Member
S
Join Date
Jun 2006
Location
Kitchener
Posts
17
I ran the RSNetWorx MD analysis on a devicenet network and the network health report displayed a bunch of "Status Not Read : [Error]" for all of the Point IO modules (32 in total), yet they all work fine.

Here's a sample from the report:

  • Local Slot 01, Address 06, Slot 02, PointIO 4pt Relay Output : [Error]
    • Status Not Read : [Error]
Any ideas what this means?

-Pete
 

Similar Topics

R
rsnetworx for control net
I am getting random comm loss (error code 561 i think?) anyway i looked it up and its loss of comm to 2 modules on a controlnet network. The 2...
Replies
0
Views
348
RY_Guthrie
R
OkiePC
Devicenet adapter for RSNetworx
The back story: We have one customer that has some equipment that uses DeviceNet that must remain in place. On those (5) DeviceNet networks they...
Replies
2
Views
884
OkiePC
OkiePC
A
RSNetworx internal problem
Hello. If anybody has seen this before and could provide some clues I and some other people would be extremely grateful if you can share such...
Replies
2
Views
1,326
AlfredoQuintero
A
P
Rsnetworx software
Hello guys, Am currently working with AB studio 5000 v30 but am having problem communicating with a remote I/o module. I also discovered I...
Replies
1
Views
1,377
Ken Roach
Ken Roach
T
Asset Center and RSNetworx
A recent post on PLCS.net reminded me that we have our PLCs on Asset Center, getting backups done periodically ... but our Devicenet, Controlnet...
Replies
0
Views
1,330
thingstodo
T
Back
Top Bottom