Siemens ET200X

SWilczek

Member
S
Join Date
May 2008
Location
Detroit, MI
Posts
1
I've got an ET200X w/built-in DI-8. It also has another DI-8 and a DO-4 (142-1BD40-0XB0). I'm only getting 12 V out of the DO-4. I verified that the ET200X has 24 V coming in. I haven't replaced the output module yet. I have two machines with similar configurations and they both have the same 12 V problem.

If anyone has any ideas, please share.

Thanks in advance,

Scott
 

Similar Topics

L
Help ET200X Siemens
I have a problem with Siemens CPU 315-2DP with 2 ET200X conected, when I go in stop and next in Run on PLC on ET200 and PLC there is the led Bus...
Replies
2
Views
3,089
Kevin Hammond
Kevin Hammond
A
reading data from siemens controller (profinet) to ethernet/IP controller
Hello I have a s7-1200 and I would like to read the tags present in this controller with my controllogix controller. The two controllers don't use...
Replies
4
Views
82
JesperMP
JesperMP
J
Emergency Stop reset Siemens
Hi need help why this “failure 5 emergency stop “ appears at every startup in the morning ? Have to shut off main switch at least 10 times on...
2
Replies
19
Views
277
John Lee
J
A
communication between two siemens plc's with different ip address
i have two plc 1. s7-1212dc/dc/dc ip; 192.168.0.1 2. s7-1500 1513-1pn ip; 192.168.3.2 i need to get data from plc1 to plc2. any idea how to do...
Replies
5
Views
96
mk42
M
D
Siemens
Hi everyone hope you'll well. Is it possible for me to download a Crack version of tia portal v13..sorry to say this but the software is very...
Replies
5
Views
192
Puddle
P
Back
Top Bottom