Transfer OPC Tags from WinCC to S7-315 PLC

henno2000

Member
H
Join Date
Jan 2007
Location
UK
Posts
72
Hi,

We have some OPC variables that are transferred into WinCC through the RS232 port via National Instruments Lookout OPC Server/Variable Engine.

What I am wanting to do, is transport these variables into a PLC.

What is the best, most efficient way of doing this?

Regards,
henno2000
 
Hi,
I've same problem, have you found the solution? I really apreciate if you tell me the solution :)
Regards
 

Similar Topics

B
Automatic Grid-Generator Transfer Panel
Hello, I need to create an automatic transfer panel that connects to the generator when the mains power is cut. I can draw up to 60kW and draw up...
Replies
0
Views
75
Bubblegun
B
S
Backplane Data Transfer Speed of CompactLogix 1769 Series?
Does anyone know what the data transfer rate for this series of CompactLogix PLC's? 1769-L24ER-QB1B to be exact. Cheers.
Replies
1
Views
83
robertmee
R
P
Panelview 550 program transfer issue
Hi all, Im having trouble transferring a program from one panelview 550 to an new one. I can insert a flash card into the old panelview and upload...
2
Replies
20
Views
336
plcguy2024
P
J
Omron CQM1H - NOS purchase - ERR/ALM LED On - Program Transfer Problems
Hi Everyone, I have a customer that needs a CQM1H (CPU51) replaced. They purchased the processor new-old-stock from a source they found online...
Replies
3
Views
335
jejump
J
afm
Bluetooth data transfer to PLC
Hi all, I am working on a project that with need to capture force sensor data in footplates in order to determine if weight shift is occurring...
Replies
1
Views
515
ScottTheEngineer
ScottTheEngineer
Back
Top Bottom