LED Describtion required on 315-2PN/DP Siemens PLC
- Thread starter Utco
- Start date
bio
Member
Bus Fault
BF stands for Bus Fault. in your case error on bus 1.
for more information take a look at the siemens manuals. for example S7-300 CPU 31xC and CPU 31x, Technical Specifications
BF stands for Bus Fault. in your case error on bus 1.
for more information take a look at the siemens manuals. for example S7-300 CPU 31xC and CPU 31x, Technical Specifications
Similar Topics
Sorry for my lack of knowledge, beginner here.
Yesterday, we had a Pro-Face SP5000 HMI fail on us. The technician said that the HMI had the blue...
hello I have 7cp476 cpu why can led always open and No connection
Why AMIo800 Analog input module's I/O LED is Lighting up Red?
Checked module connections, 4-20ma wires etc but this light is continuously Lighting...
Hi everyone,
I got a Parker HMI, CTC PA2. I tried to download program to it but it froze in the process and could not finalize. Now, when I try to...
Hi all,
I am trying to do Modbus communications via the CB1241 RS485 Communication Board on a Siemens S71200 PLC. I am using a 1215C CPU. After...