I have the following materials for a project im trying to setup, but because of AB numerous software programs, i am stumped!
1756-L55 CPU
1756-enbt
1756-dnb
1756cnb
1756ib16d
1756ob32
1756if8
1756of4
all of the above in a 1756-A10 rack with PA72 PS
(2) Panelview Plus 1500
I have a switch with the (2)PV+1500, 1756-enbt, my laptop connected.
Can someone please guide me as to how i can setup comms first and then how i would get the information to the touch screens, both touch screens will display and control i/o of the 1756-L55, so basically all screens will be the same etc.
Thanks in advance for any help that you provide for me as i am totally stumped, ab good but this new software sucks!
Best regards,
Introl
1756-L55 CPU
1756-enbt
1756-dnb
1756cnb
1756ib16d
1756ob32
1756if8
1756of4
all of the above in a 1756-A10 rack with PA72 PS
(2) Panelview Plus 1500
I have a switch with the (2)PV+1500, 1756-enbt, my laptop connected.
Can someone please guide me as to how i can setup comms first and then how i would get the information to the touch screens, both touch screens will display and control i/o of the 1756-L55, so basically all screens will be the same etc.
Thanks in advance for any help that you provide for me as i am totally stumped, ab good but this new software sucks!
Best regards,
Introl