FX3U + Enet module + Beijer OPC

martve

Member
Join Date
May 2008
Location
Talli n
Posts
1
Hi,
Having problem with connecting fx3u to the beijer opc server.
I know how to configure the enet module but the question is what kind of connection the Beijer Opc server is looking for. PLC is connected to network and i can program it using ethernet.

Has someone had a similar problem?
 

Similar Topics

I have a FX3u-48M PLC with a FX2n-16EX card, FX3u-4AD and then a FX3u-ENET I am trying to put this processor on our network I have configured the...
Replies
1
Views
3,661
hi All I am completely green in Mitsubishi PLC (i used to program siemens) but need kepware to connect to FX3U pls with ENET adp module. Could...
Replies
31
Views
6,978
Hello, I have an FX3u-16MR/ES, FX3u-ENET (version 1.0), using GX Works2 Version 1.596W (Trial version). Using FX Configurator-EN...
Replies
9
Views
4,823
Hi all, I have finished installing ethernet adapter module FX3U-ENET-ADP on the FX3U-48M PLC. From the ethernet module, i connected it to a...
Replies
12
Views
3,317
Good morning all I've inherited a PLC system that has two Q01 and 6 FX2n PLCs The FXs have a FX3u-ENET module. There is quite a bit of...
Replies
15
Views
6,150
Back
Top Bottom