Johnson Controls / Honeywell - Building Automation

Jerick

Member
J
Join Date
Jun 2003
Posts
4
I made a post two weeks ago on bacnet protocol for AB PLC. Prosoft said they have a module for Bacnet to DF1 protocol in Prolinx form.
But our customer has rejected our offer of AB + Prolinx. Now the approved vendor are Honeywell and Johnson control.

Below is the Input /Output detail.

can any one please give me the model suitable for the above I/O from Johnson or Honeywell which supports Bacnet protocol.

Digital input: 10
Digital output: 3
Analog input: 1
Analog output: 0
Protocol: Bacnet

Manufacturer: Johnson controls or Honeywell

Thanks
 

Similar Topics

S
Data collection from METASYS BAS Johnson Controls from Inductive Automation Ignition
Hello All, I am looking for a way to get the data/information from METASYS BAS of Johnson Controls. I would like to get this data into Inductive...
Replies
4
Views
2,371
damica1
D
JRW
Johnson Controls N2 and PLC Communication
Control Gods, I see Proface has an interface for Allen Bradley. But have any of you done this through any other brand of PLC??- Is it difficult...
Replies
1
Views
2,133
Oakley
O
Russ
Communicating AB with Johnson Controls
A co-worker has Johnson controls unit and is trying to find a way to remote notification if an alarm occurs. He is running a lot of AB products on...
Replies
3
Views
5,816
Russ
Russ
Peter Nachtwey
I will be replacing Jack Johnson
Hydraulics and Pneumatics magazine has chosen me to be the ne technical contributor. I will be replacing Jack Johnson that wants to concentrate...
Replies
9
Views
2,438
Toine
T
D
I buy surplus PLCs, automation controls, industrial and MRO.
What's the best way to connect with more suppliers?
Replies
0
Views
45
Devlin
D
Back
Top Bottom