PID control from PLC with pulsating output

harrydeharry

Member
H
Join Date
May 2008
Location
Delhi
Posts
237
hi need to install a pt100 in my machine and want to control it from PLC pid.When I downloaded FB 41 and 43 into cpu it goes to off and doesn't come to run by any mean(using S7 318-2DP).

I need a pulsating output for the same any suggetion ?
 

Similar Topics

K
PID Process Control/PLC
I am currently trying to implement a process control of the temperature of water going down a drain after it has gone through 2 radiators. I have...
Replies
6
Views
1,962
sparkie
S
D
PID Control on LS XEC PLC Losing Parameter changes
I am using a LS PLC - DR60SU - to control various control loops. I have set up the PID loops in the PLC and am using an HMI to set the sepoints...
Replies
0
Views
3,429
DS4275
D
T
PID control program in CP1E-NA series OMRON PLC
Hi! I have CP1E-NA series OMRON PLC which is in-built 2 analog inputs and 1 analog output. Verified the inputs and outputs are working well in...
Replies
0
Views
3,889
tbalajihsr
T
ceilingwalker
PLC-5 and PID Control
Good day all. I would like to know if someone could explain how to program in RSLogix5, the PID control settings. I have read the Allen-Bradley...
Replies
0
Views
1,135
ceilingwalker
ceilingwalker
J
Request help for pid control in plc
Dear Friends, i am using Siemens S7200 PLC. my project is i have to control VFD through PID. i made the program and also it works...
Replies
0
Views
1,561
jaffarsaleem
J
Back
Top Bottom