I'm just getting started with my G3 display. I have a tag that is reading pressure. I have a setpoint on the low end of the scale that is adjustable and an over pressure setting. When the pressure goes over the first adjustable setpoint I want to change the color of the pressure readout. Then if it gets to the over pressure setting I want to change it again. So maybe orange showing that its reached the first then red when it goes over.
When I look at the tag I have a color setting and a setpoint to change this color. However the setpoint is a preset value. This is good for the over pressure but not the adjustable setpoint.
I'm sure this can be done I am just having trouble getting there.
Thanks
When I look at the tag I have a color setting and a setpoint to change this color. However the setpoint is a preset value. This is good for the over pressure but not the adjustable setpoint.
I'm sure this can be done I am just having trouble getting there.
Thanks