Nauman
Member
Hi,
I want to control 5 servo motor with PIC16F877 and stand alone (Basiclly the design just need start all the servo when power on)...which only will rotate 70 to 120 degree then go back to where it start rotate for each servo motor and all the servo moving at same time. Below is the list of servo motor i using:
1)Three ,
Hitec HS-55 Servo(rotate 100,110,120 degree) //http://www.hobbyhorse.com/hitec_hs55.shtml
2)One ,
HS-6975HB servo(rotate 70 degree) //http://www.robotstore.com/store/product.asp?pid=947&catid=1638
3)One ,
HS-65HB servo(rotate 80 degree) //http://www.imagesco.com/catalog/motors/HS-65HB.html
hope u all can help me,thk alot.
I want to control 5 servo motor with PIC16F877 and stand alone (Basiclly the design just need start all the servo when power on)...which only will rotate 70 to 120 degree then go back to where it start rotate for each servo motor and all the servo moving at same time. Below is the list of servo motor i using:
1)Three ,
Hitec HS-55 Servo(rotate 100,110,120 degree) //http://www.hobbyhorse.com/hitec_hs55.shtml
2)One ,
HS-6975HB servo(rotate 70 degree) //http://www.robotstore.com/store/product.asp?pid=947&catid=1638
3)One ,
HS-65HB servo(rotate 80 degree) //http://www.imagesco.com/catalog/motors/HS-65HB.html
hope u all can help me,thk alot.