mdeltat Member M Join Date May 2007 Location Los Angeles, Ca Posts 84 Jun 25, 2008 #1 Will a 200mA max output from a P.E. be sufficient to power electromechanical cube type relay?
mdeltat Member OP M Join Date May 2007 Location Los Angeles, Ca Posts 84 Jun 25, 2008 #3 Thank You. Just to be sure... this is 120vAC.
allscott Member Join Date Jul 2004 Posts 1,332 Jun 25, 2008 #4 At 120V that's 24 watts, more then enough for a little ice cube coil (around 1-2W generally). Your fine.
At 120V that's 24 watts, more then enough for a little ice cube coil (around 1-2W generally). Your fine.
brucechase Member Join Date Sep 2004 Location Augusta GA Posts 721 Jun 26, 2008 #5 They do make Photoeyes with relays built right into them. I have used the 9000 series from AB with both timing and relay out for simple things where I don't need elaborate control.
They do make Photoeyes with relays built right into them. I have used the 9000 series from AB with both timing and relay out for simple things where I don't need elaborate control.
mdeltat Member OP M Join Date May 2007 Location Los Angeles, Ca Posts 84 Jun 27, 2008 #6 Thanks Guys!!