communication

What is the difference between English, French and German? What's the difference between telephone and telegraphy? The first use a different set of words to express what has to be said. The latter use different signals to communicate. It's the same with ethernet, DH+, RS-232 and DH-485.

You can find more on RS 232 here.
DH485 and DH+ are both protocols used by Allen-Bradley. These are both based on RS485, of which you can find more info here. DH485 is limited to 19200baud, while DH+ only uses baudrates above this and limited to 57600baud.
More info on ethernet can be found here.

Kind regards,
 
THANKS Jean Pierre Vandecandelaere,
I HAVE ONE MORE QUESTION
WHAT WILL BE THE DATA TRANSFER RATE BETWEEN SCADA(PC) AND PLC?
IS IT DEPENDS ON PROCESSOR SPEED?

THANKS IN ADVANCE
MJK
 
Hello muralidharjk;
This will depend amongst other things on the processor speed, but also on the RAM memory available, on the %loading of the CPU, on the existence of a separate communictation processor, on the physical limitations of the protocol selected and the network data rate.
Amongst other things.
Regards,
Daniel Chartier
 

Similar Topics

Hello, I need to access the bits from the fire system control panel through RS-485. So, I used Read Var block to read from the panel...
Replies
0
Views
32
Hello all, I am currently trying to establish a message instruction to pass data from a 1756-L73 to a 1756-L71. My communication path from the...
Replies
6
Views
110
I have a CNC cutting equipment, all the components are Fanuc from the CNC CPU A02B-0307-B822, a PLC AIF01A and a panel i, on the panel i (operator...
Replies
1
Views
47
In our production plant we have multiple different networks (subnets). IT dept have setup routing between them so different subnets can...
Replies
0
Views
49
Is it possible to connect a PC with running WinCC Advanced or Unified to a siemens PLC such as S7-1200 across different subnets? The computers can...
Replies
0
Views
53
Back
Top Bottom