Problem Between Citect7.0 & MelsecFx2N

bectbe

Member
B
Join Date
Jul 2008
Location
INDIA
Posts
1
hi........

I used citect7.0 & Mitsubishi Fx2N series PLC.
In program i SET one bit M25 in plc at 8:00 AM and generate report in citect & then i RESET M25 in citect.
But if Citect is Running on PC at 8:00 AM then that report will not generated.
But if i shutdown Citect & then RESTARTED citect then report will be generated.

Where i make fault any one told me?
 

Similar Topics

E
Communication problem between panelview 800 to compactlogix l2 controller
Hi experts, I have Panelview 800 Teriminal (version 4.012) connected to 5370 compactlogix L2 controller(1769-L24ER-QBFC1B). Through Ethernet...
Replies
6
Views
16,392
erivinoth
E
S
problem in communication between micrologix 1200 & Panel View 600 Plus by serial DF1
problem in communication between micrologix 1200 & Panel View 600 Plus by serial DF1 Hello Friends i have to do communication between micrologix...
Replies
6
Views
6,607
Geospark
Geospark
J
problem comunication between PLC and SCADA
hallo guy's, I have problem in comunication between PLC and SCADA. :shoot: I connected the plc with the scada and codesys due the keep server...
Replies
0
Views
1,463
jakob88
J
R
problem connection between two CPU's in SIMATIC step 7
HI every one , I'm trying to connect two cpu's in siemens step 7 I followed all steps7 in this video https://www.youtube.com/watch?v=-qnvwz8nlRQ...
Replies
8
Views
2,628
rikita
R
D
Problem with ethernet connection between PG and Simatic Panel
Hi all, I am trying to load a program to a simatic panel I have set up the ethernet communication so that both my pg and my panel have the...
Replies
3
Views
2,388
drenno
D
Back
Top Bottom