Speed And Torque Control In Siemens Mm440

RAJATPALLAV

Member
R
Join Date
Jul 2007
Location
BHOPAL - INDIA
Posts
34
Dear All !!

We are going to use Micromaster MM440 for puller application in Extrusion process.
Problem is how to changeover from speed control in one direction to torque control in the reverse direction ???

Torque control is available if P1500 is programmed. What is significance of P1071 , P1072 , P1075 , P1076 ???
 

Similar Topics

AutomationTechBrian
Wind / Unwind Application, Torque vs. Speed Control
I'm doing my first wind/unwind project, and I need some input from someone with more experience. ...I'm getting my butt kicked trying to control...
2 3
Replies
38
Views
11,279
AutomationTechBrian
AutomationTechBrian
R
Linear actuator control - speed vs torque
Hi, We want to buy a linear actuator 24VDC. We want to control this with a circuit board fro electromen...
Replies
8
Views
2,295
janner_10
J
P
S120 torque control : limit speed
We will use a S120 drive for wheight compensation. The drive has to give extra force on a wheigt that is attached to cables. Problem now is, if...
Replies
0
Views
3,757
Plc_User
P
P
PPR of encoder for torque control at low speed
We have an application where we use a motor with encoder to provide torque at low speeds (+- 5 Hz). The drive is Sinamics G120 in closed loop...
Replies
7
Views
3,255
Plc_User
P
R
Speed And Torque Control In Siemens Mm440
We wish to use Siemens MM440 in extrusion application, where motor works in torque control mode in one direction and speed control mode in reverse...
Replies
2
Views
5,283
manmeetvirdi
M
Back
Top Bottom