I asked a question last night about the revision numbers on these cards. I would also like to know if there is no revision problem ,can I just swap the cards like you normally would and download the parameters to it? or is there some other trick?
1747-SDN Replacement
- Thread starter sodonnell
- Start date
TimWilborne
Lifetime Supporting Member
Your going to be better off to keep one thread going than starting multiple threads
http://www.plctalk.net/qanda/showthread.php?t=40881
http://www.plctalk.net/qanda/showthread.php?t=40881
Similar Topics
We are in the process of upgrading a controls system. The existing system is a SLC500 with some IO cards and a 1747-SDN module communicating to a...
One of our running machine's DeviceNet Module (1747-SDN) had malfunctioned. So, we replaced it with a new one from spares.
We maintained the...
I have a 1398-DDM-009X-DN that was talking to a 1747-SDN in a rack with a SLC 5/05.
Recently, after a download of new parameters to the servo...
Good Morning ,
After all these years , I still can't wrap my head around DeviceNet :( . I have RS Networx / DeviceNet. I would like to...
Morning fellas,
Anyone know if it's possible to receive the error codes displayed on 1747-SDN modules in a SLC 5/05 PLC?
I've looked through the...