VFD Mitsubishi E560 and FR-PU04
- Thread starter karlag
- Start date
MikeVT
Lifetime Supporting Member
Yes, I believe the FR-PU04 will work with the E500 series drives.
Just verify that the jack on the drive is the cat5 style jack.
Just verify that the jack on the drive is the cat5 style jack.
rpoet
Member
The E-560 is the 600v version of the E-540 (400v) and the E-520 (200v). I know that the FR-PU04 can be used on the 200v and 400v versions. It should be the same for the 600v version. Live MikeVT said, just check that the drive has a CAT5 style connection.
This link confirms that the FR-PU04 works with the entire E-500 line:
http://www.meau.com/eprise/main/Web_Site_Pages/Public/Products/Product_Selection_Guide/VFD-SG-Section/P-VFD-E500-Series1
Good luck,
rpoet
This link confirms that the FR-PU04 works with the entire E-500 line:
http://www.meau.com/eprise/main/Web_Site_Pages/Public/Products/Product_Selection_Guide/VFD-SG-Section/P-VFD-E500-Series1
Good luck,
rpoet
Similar Topics
I have a problem with Mitsubishi f700 22kW [ fr-f740-00470-ec] VFD. When it arrived to our workshop, there was a short circuit between the...
Hey Every one
I am trying to set to frequency of vfd to 100z but cant
the parameter #125 is the parameter to set the frequency of vfd more than 70...
Hello Everyone
I am trying to establish RS485 communication between Mitsubishi vfd E700
and delta plc DVP20EX00R2
The problem i am facing...
Hi everyone after a long time!!!
I have afew stone cutting machines that are having VFDs upgrades. They all have various S540 models installed...
Hi Folks...
I am considering connecting a braking resistor
without a brake unit, to the terminals P/+ and N/-- of this 22kw, F-700 Mitsubishi...